|
You will need an Adobe Acrobat
program to view and print brochures.
You will also need to un-ZIP the files once downloaded
using WinZIP or PkZIP.
|
|
|
|
|
|
Technical Data
Max. sheet size,
standard :
450 x 650 mm
Max sheet size,
LPx-L:
545 x 650 mm
No. of available
daylight :
3 / 6
Typical amount
of sets/daylight:
10
Cycle time:
25 - 35 min (depending
on material)
Max. pressing
force :
300 kN
El. power supply:
55 - 96 kVA, depending
on daylights
|
|
|
The laminating presses series
LP are originally developed for the lamination of RFID-cards
and other cards with a sensitive and / or highest quality
surface. The press is working according to the single
stack principle; i.e. pressing and cooling down is executed
in a single station in order to avoid any distortions
or other damages which may occur after releasing the
pressing force before cooling. The machine is also equipped
with a "soft-touch" device in order to avoid any impact
on to the sheets which may cause damages. In order to
have the same pressure in every daylight, the machines
have a weight compensation for the upper cassettes avoiding
a pressure increase on the lower cassettes due to weight
addition of the upper cassettes and heating plates.
Each heating plate is equipped with two heating circuits
for an even heating. Five hydraulic pressing cylinders
guarantee for a constant pressure across the area of
the pressing plates.
An automatic magazine handling
system allows the operator to fill the cassettes and
to transfer them into the feeding station of the machine
while the former lot is processed. Once one cycle is
finished, the cassettes are conveyed automatically to
the discharge station, where the cassettes are to be
taken out of the machine. After that, the prepared cassettes
are transferred into the pressing station automatically.
|
|
|
|
Technical Data
Max. sheet size,
standard :
450 x 650 mm
No. of daylight
:
4
Typical amount
of sets/daylight:
10
Max. pressing
force :
300 kN
El. power supply:
55 kVA
|
|
|
The laminating presses are also
available as pressing stations only. These machines
are of very compact build and very interesting in case
space is an issue and / or no big volumes are to be
produced.The LP-4M compact lamnator is equipped with
4 daylights.
|
|
|
|
Technical Data
Throughput :
17280 cards/hour
Max sheet size:
540 x 640 mm
No. of available
daylights :
8 - 12
Typical amount
of sets/daylight:
10
Cycle time:
15 - 30 min (depending
on material)
Max. pressing
force:
Heating press: 60 tons
; Cooling press: 100 tons
El. power supply:
86 kVA, depending on number
of daylights
|
|
|
The automatic laminator C-port
8A is used for a production of both contact and contactless
cards. The machine is designed with independent heating
and cooling press, thus avoiding costly heating up and
cooling down of the same plates during lamination process.
It not only saves a lot of energy but also reduces the
cycle time.
The heating press is heated with termal oil, which offers
a much better temperature distribution then electric
heated plates. The cooling press is cooled down through
a closed-circuit cooling water system.
Both the heating press and the cooling press are equipped
with multi hydraulic cylinders. The individual control
for the pressure and the feedback system
|
|
|
| Louda Systems
offers solution for your existing punch machine and with
the new high quality punch LOUDA SYSTEMS "C-port
GSM" to a reasonable price ! This model is also available
for SIM cards / GSM !
|
more...
|
| Besides the proven
models LP-4M, LP-3A, LP-6A especially for RFID cards we
now increased our supply with twin-stack Laminator model
LOUDA SYSTEMS "C-port LP5" for up to 25.000
cards per hour. |
more...
|
|
