Card Punch L-GSM
C-port GSM 3000
Edge Cutting Unit AFG
back

The machine is a designed as a single-card processing unit; i.e. each card is punched individually. The cards are separated out of a stationary card stacker and fed into guide rails by means the card is conveyed into the punching station. The waste of the perforation is discharged out of the punching area by means of a vacuum-device. The perforated cards are forwarded onto an outfeed belt where the cards a placed in a fan-like manner for easy discharge.

*Any other shape within the ID 1- circumference can be produced as well. In need, please contact us for further information.

The C-port GSM3000 is a punching machine for precise perforation of plastic cards in ISO-format according to the chip-bearer dimensions and scribing the narrow bridges.

The pneumatic punching system together with high precision male & female dies achieves excellent punching quality.
The precise tool knife scribes lines on both sides of the card at each narrow "bridge" connecting the SIM to the card body. This makes easily to break out the SIM from the card body when needed.
On both punching and scribing stations the cards are located by a positioning device to ensure acuracy.

Card stacking unit includes two interchangeable output magazines and finished card stacking device. The cards which do not pass thickness detection are sent through stacking device into the exit collection box located outside the safety guards of the machine.

This machine is designed to trim 2 edges of a laminated sheet to obtain a right angle and straight edges for further sheet processing with edge registration, for example silk screen printing.

The sheets are stacked onto a trolley and brought into the feeder. From here the sheets are automatically separated and conveyed to the first guillotine where the first edge is aligned according to printmarks and cut. The sheet is then forwarded to the second cutting station located rectangular to the first one, aligned according to printmarks again and cut. The ready processed sheets are stacked onto a trolley again to be taken out comfortably by the operator when the adjusted stack height is reached and / or the job is finished.

top